=产品介绍=
==包装==
==外观==
==配件==

=快速指南=
==接线方式==
==工作状态指示==
==网页配置==
===登录===
1.访问172.16.0.1（默认地址）登录管理后台，用户名root,密码password

[[File:Login.png|1000px]]
===4G模块配置===

1.选择网络->接口，进入接口配置页面

[[File:Sel.png|1000px]]

2.添加新接口

[[File:Add.png|1000px|]]

3.新接口协议选择QMI蜂窝，新接口名称自定义输入，然后提交

[[File:Create_int.png|1000px]]

4.基本配置页面调制解调器节点选设备/dev/cdc-wdm0,apn填3gnet，用户名3gnet,密码3gnet,认证类型CHAP，保存应用

[[File:Basic_set.png|1000px]]

5.防火墙配置页面点选wan，保存应用

[[File:Fw_set.png|1000px]]

6.配置成功后可在接口页面看到刚才添加的新接口，并且接收和发送都有数据

[[File:Succ.png|1000px]]
===WAN口和4G/5G网络路由优先级设置===
1.进入接口页面，点击4G/5G网络的修改

[[File:Wwan_m_1.png|800px]]

2.进入高级设置，修改网关跃点，如需要4G/5G网络优先级低于有线网的则修改此跃点数大于有线网跃点数，如需要优先级高于有线网的则修改此跃点数小于有线网跃点数.4G模组设置需手动配置config文件，加入metric option.

[[File:Wwan_m_2.png|800px]]

===WAN口和4G/5G网络动态管理设置===
1.进入负载均衡页面

[[File:Wwan_b_1.png|800px]]

2.进入通知设置页面，修改mwan3.user内容，可参考以下设置

[[File:Wwan_b_2.png|800px]]


'''mwan3.user参考'''
<pre>
#!/bin/sh
# This file is interpreted as shell script.
# Put your custom mwan3 action here, they will
# be executed with each netifd hotplug interface event
# on interfaces for which mwan3 is enabled.
# There are three main environment variables that are passed to this script.
# $ACTION
#      <ifup>         Is called by netifd and mwan3track
#      <ifdown>       Is called by netifd and mwan3track
#      <connected>    Is only called by mwan3track if tracking was successful
#      <disconnected> Is only called by mwan3track if tracking has failed
# $INTERFACE	Name of the interface which went up or down (e.g. "wan" or "wwan")
# $DEVICE	Physical device name which interface went up or down (e.g. "eth0" or "wwan0")

echo "$INTERFACE $INTERFACE $ACTION" > /dev/console
case "$ACTION" in
ifdown|\
disconnected)
	if [ "$INTERFACE" = "wan" ]
    then
        echo "restart 4g" > /dev/console
        ifdown wwan
        ifup wwan
        echo "done" 
	fi
;;
connected|\
ifup)
	echo "no action" > /dev/console
;;
*)
	echo "*"  > /dev/console
;;
esac
return 0
</pre>

=升级固件=
==使用USB线升级固件==
==使用TF卡升级固件==

=常见问题解答=

=资源下载=